The Accufast XL has 3 sets of sensors. Watch the video below to see how to locate and clean the sensors. 2 sets of sensors are on the head and 1 set on the base. On the labeling head, 1 set is for detecting the labels and another set for the take-up spool. To detect the […]

One of the most common parts to replace on the Accufast KT tabber is the tab sweep. When the machine operates, a mailer goes into the front of the machine, hits a tab/wafer seal.  The wafer seal is folded in 1/2 by the bottom metal plate of the machine and the white plastic tab folds […]

? I just purchased a used Accufast XL labeler and KT Tabber. But they came without manuals. Were can I get manuals for them? Answer:  SuppliesForMailers.com For the Accufast XL Operators Instruction Manual go here.  http://suppliesformailers.com/xl-operators-manual-instruction.aspx For the Accufast KT Operators Instruction Manual go here.   http://suppliesformailers.com/accufast-kt-operators-manual.aspx While you are there.. Need tabs – wafer seals made to […]

In light of all the changes in the mailing equipment industry, I think it’s time to check the state of the union! With all the mergers and acquisitions, like Pitney Bowes buying Secap and independent dealers, there has been a lot of changes in the industry. And from what I’m seeing, it is completely altering […]

Your Pitney Bowes Personal Post meter does not actually read and measure the amount of ink in the 769-0 print cartridge.  It relies on you to reset the counter when you replace the cartridge.  It then starts a countdown based on your usage and maintenance cycles. You may need to follow the installation program for […]

Do you offer a KT2 upgrade kit to allow it to apply 1.5 inch tabs?  And where can I purchase the tabs? No upgrade kit is available for the Accufast KT2 double tabber to allow it to apply 1.5″ tabs.  This is due to the number of parts that would need to be replaced.  By […]

Below is an Announcement from Accufast explaining the KT Factory Upgrade offer to retrofit your current KT to allow it to do 1.5″ tabs and turn it into a KT1.5 I just wanted to let you know that there’s no longer available!ACCUFAST HAS CLOSED, AND PARTS ARE LIMITED We’re announcing our first step in response […]

Hello.  Hopefully you can help me. I’m using a Rena DA-590 printer that I inherited when I started at my company.  We sell speech materials and print an average of 9,000 envelopes per month.  We were told that this unit will not generate the intelligent mail barcode. Is this the case and if so can […]

Question: My Secap 30K will start up and print, and then suddenly, the transport speeds up, it misses a few pieces, then I get a transport stall.   Sometimes it will feed a few, not print at all, and stall.  I have cleaned the feeder and printer paper sensors.  If I move the belts by hand, […]

elsievo Newbie Karma: 0 Posts: 2  Rena L-326 tabbing problems « on: April 02, 2009, 07:07:40 PM » I just purchased a used Rena L-326 tabber/labeler. Have been experiencing problems with the Rena clear tabs not being folded over consistently. I’ve tried different thickness settings. According to the book I’ve got the tabbing roller in the right spot, am using […]