Walco 350INC Incline Bump Turn

Now you can run your folder or tabber can now be run inline with the rest of your equipment thanks to the Walco 350INC Incline Bump Turn System. With one simple adjustment, the infeed end of the Walco 350INC can be adjusted to meet the outfeed end of your folder, tabber or any machine with a low output. The output end is stationary, resulting in an adjustable inclined ramp for your product to be transported onto a standard height tabber or addressing machine.  Made in the USA by Walco System and built to last, with a warranty 2nd to none.

Walco 350INC Incline Bump Turn
Features

• Quick and Easy Setup
• Non-Proprietary Components
• Variable Speed Transport
• Adjustable Belts & Guides
• Watch this machine in action!

Uncompromising Drivetrain

• Large Diameter Steel Shafts
• Steel Drive Pulleys
• 12″ Wide Steel Rollers
• Sealed Shaft Locking Collar Bearings

Specifications

• Turn Direction: Left or Right
• Material Size: Min. 5″L x 3″W – Max 8.5″W x 11″L
• Material Thickness: Up To 1/2″ Standard
• Physical: 35″L x 23.5″W x 20-36″H (infeed) 33-36″H (outfeed)
• Electrical: 110 VAC Single Phase 10 Amp Circuit

Similar Posts:

• Asmarc anounces the Accufast ET Edge Tabber! Posted June 4, 2009
• Secap Jet 1 Printer for Sale Posted June 2, 2009
• Introducing the Walco F110E Series Friction Feeder Posted April 5, 2013
• Video: Replacing the tab sweep on the Accufast KT Tabber Posted November 27, 2017
• Testing Sensors on most Bryce – Secap Printers and more Posted April 30, 2020