Walco 240BT Bump Turn System

The Walco 240BT Bump Turn System provides a simple inline solution for rotating products 90 degrees.  This unit is capable of turning a large range of material sizes and thicknesses left or right with very little adjustment.

The Walco 240BT Bump Turn System’s easy integration coupled with versatility makes it the best choice for any turning application.

Save time and get more done in 1 pass!

Application Example

• Apply 2 tabs with the Accufast KT2 Tabber then into the Walco 240BT then into a printer like the Accufast P8 or Walco 350IJ.  Job Complete!

Walco 240BT Bump Turn System Features

• Fast and simple setup
• Non-Proprietary Components
• Variable Speed Transport
• Belts & Guides that are easy to adjust

Rugged Drivetrain

• Rugged Large Diameter Steel Shafts
• Steel Drive Pulleys
• 12″ Wide Steel Rollers
• Dependable Sealed Shaft Locking Collar Bearings

Specifications

• Turn Direction: Left or Right
• Material Size: Min. 5″L x 3″W – Max 8.5″W x 11″L
• Material Thickness: Up To 1/2″ Standard
• Physical: 24″L x 23.5″W x 33-36″ H
• Electrical: 110 VAC Single Phase 10 Amp Circuit

Similar Posts:

• New Accufast 6FV Conveyor $1,495 Was $2,800 Posted April 18, 2011
• Introducing the Walco F110E Series Friction Feeder Posted April 5, 2013
• Greenwave 410 or 430 Turn Old Boxes Into Packing Material Posted June 15, 2020
• Asmarc anounces the Accufast ET Edge Tabber! Posted June 4, 2009
• Accufast XL Sensors: Cleaning and replacing Posted November 28, 2017