Types of Mailing Equipment


Mid Level Address Printers

Rena Envelope Imager 3.0

Meet the Address Printer to Revolutionize Your Mailroom – The Rena Envelope Imager 3.0

If you’re looking for a way to add a little more pizzazz to your mailers and increase your mailroom equipment automation, the Rena Envelope Imager 3.0 is the address printer you need.  Creating personalized mailers effortlessly, this handy little unit can really help drive a brand image home.

The Rena Envelope Imager 3.0 Packs a Punch

Although there are certainly bigger address printers and more expensive mailroom equipment, the Rena Envelope Imager 3.0 is one of the best values in the market.  With a print resolution of 600 x 600 dpi and speeds up to 34,000 postcards or 26,000 envelopes per hour, this is one printer that can stand up easily against any other mailing machine on the market.  Even heavy users will appreciate its durability, with a duty cycle equivalent to two million pieces of mail per month for five years.

Rena Envelope Imager 3.0

The Rena Envelope Imager 3.0 is a tough, feature-packed machine with lots of things to brag about – here are just a few of them:

  • Two independent print heads, both with a three-pen stitched design.
  • A vertical print range of 12 inches per print head.
  • One huge envelope hopper that holds up to 750 #10 envelopes.
  • Four print qualities to choose between for increased speed or quality.
  • A visible ink monitor that never leaves you guessing.
  • A six-cartridge setup so you get the most out of every ink tank.

When you’re ready to simplify your mailing, and even dress it up a bit, it’s time to add the Rena Envelope Imager 3.0 to your mailroom.

Rena Imager 3.0 Specifications

PRINT TECHNOLOGY: Thermal Inkjet, Six HP 45A-Style High Capacity Cartridges

34,000 /hour at 150 dpi
25,000 /hour at 200 dpi
20,000 /hour at 300 dpi
11,000 /hour at 600 dpi
(9 Lines on 4”x 6” Postcard)
26,000 /hour at 150 dpi
19,000 /hour at 200 dpi
15,000 /hour at 300 dpi
7,200 /hour at 600 dpi
(9 Lines on #10 Envelopes)


DescriptionDots Per InchResolution
High Quality600 d.p.i.600 x 600 dpi
Letter Quality300 d.p.i.600 x 300 dpi
Standard Quality200 d.p.i.600 x 200 dpi
Draft Quality150 d.p.i150 d.p.i

IMAGE AREA: 3” X 17” w/ 12” vertical range
PRINT HEAD SPLIT: 3 Pen Stitched + 3 Pen Stitched Design
PRINT ORIENTATION: Normal and Reverse
FONTS: All TrueType fonts available on PC
PRINTS: Graphics, logos, and barcodes
MATERIAL SIZE: length – 5” to 17”  Width – 3” to 13.5”
DUTY CYCLE: 120 million addresses total or 2,000,000 per month over a 5-year life cycle

MORE Rena Imager 3.0 Specifications
PROCESSORAMD TigerSharc 100 MHz DSP with Dual Calculation Technology
INK MONITORVisible on Display
FEEDER – CAPACITYIntegrated Clutch Controlled Feed System – Up to 750 #10 envelopes
SOFTWAREWindowsTM Printer Drivers for WindowsTM 98, 2000, NT, ME, XP, 8, 9 AND 10
PC INTERFACECentronics Parallel and USB 2.0
DIAGNOSTICSResident in firmware
 DIMENSIONS 25” H x 28” L x 22” W (635 mm H x 711 mm L x 559 mm W)
 WEIGHT 80 lbs. (36.4 kg.)
 ELECTRICAL 115VAC or 240VAC, 50/60 Hz
 OPTIONS Conveyor/Stacker and Drop Tray
 COUNTERS One operator resettable job counter, one permanent lifetime counter

More Envelope Printers..

Similar Posts: