Walco DG-X Divert Gate
$5,700.00
💳 Prefer monthly payments? Most machines qualify for leasing — estimate your monthly payment or call 866-430-2874.
The Walco DG-X is a 9.75 in long divert gate for diverting or culling pieces from a production line; optional DG-RR rubber entry roller $630.
Description
About the Walco DG-X
The Walco DG-X is a divert gate measuring 9.75 inches long. It diverts or culls selected pieces out of the product stream, steering them off the main path while good pieces continue straight through.
On a production mail line, a divert gate is how you pull rejects, samples, or specific batches without stopping the line — for example culling pieces flagged by an inspection or reading station. An optional DG-RR rubber entry roller is available to improve piece control at the gate entry.
Specifications
| Type | Divert gate |
|---|---|
| Length | 9.75 in |
| Function | Diverts or culls selected pieces out of the product stream while good pieces continue straight through |
| Optional accessory | DG-RR rubber entry roller, sold separately, for improved piece control at the gate entry |
| Typical use | Pulling rejects, samples or specific batches without stopping the line, including pieces flagged by an inspection or reading station |
Specifications above are drawn from this product’s own All For Mailers page copy; no Walco spec sheet for this model is on file. Not published by the source and therefore omitted: maximum and minimum piece size, throughput speed, gate width, weight, and electrical requirements.
Why Buy From All For Mailers
Veteran-owned, expert since 1991, authorized Walco dealer — real installation and service support, not just a box shipped to your dock.
Need supplies or parts? Visit SuppliesForMailers.com.
Frequently Asked Questions
What's included with the Walco DG-X?
The Walco DG-X ships as the 9.75-inch divert gate. An optional DG-RR rubber entry roller is available separately at $630 for improved entry control.
How long is the DG-X and can I improve piece handling at the entry?
The DG-X is 9.75 inches long. For better control of pieces entering the gate, an optional DG-RR rubber entry roller is available separately at $630.
Does the DG-X need a transport base under it?
The DG-X is a gate that sits in the product stream, so it is installed on a line built around a Walco transport base such as the 420VT, 655VT or 960VT. Tell us your layout and we will confirm the base and drive your configuration needs.
Can I get parts and supplies?
Yes — visit SuppliesForMailers.com or call 866-430-2874.
Related products
- New
- New
- New
- New
Reviews
There are no reviews yet.