Walco Combo Feed and Transport Systems
Walco Combo Feed and Transport Systems — such as the 655VFT and VFS200 — pair a VF200 vacuum feeder with a powered transport in one unit for inline inkjet printing, inspection or finishing. All For Mailers supports them with parts, supplies, and service.
Description
About the Walco Combo Feed and Transport Systems
In an effective mailing operation, every link in the chain matters — including the transport. Walco Combo Feed and Transport Systems answer that by combining the feeding and transporting parts of the operation into a single, affordable, pre-engineered unit. That saves money and setup time, and simplifies running two of the most critical components together reliably.
The 655VFT pairs the Walco VF200 vacuum feeder with the Walco 420 transport system — a heavy-duty combination for demanding or unusual materials — while the VFS200 blends the VF200 with a simpler five-foot vacuum transport for smaller operations. The systems handle material from a minimum of 3″ x 5″ up to about 28″ x 19.5″, with a 1″ maximum thickness, running on a standard 110 VAC single-phase 10-amp circuit and linking to other components through a dry-contact low-voltage interlock. The 655VFT measures 65.5″L x 23.5″W with height adjustable from 33 to 36 inches; the VFS200 is 85.5″ long.
Specifications
| Configurations | 655VFT — Walco VF200 vacuum feeder with the Walco 420 heavy-duty transport; VFS200 — VF200 with a five-foot vacuum transport |
|---|---|
| Minimum material size | 3 in x 5 in |
| Maximum material size | About 28 in x 19.5 in |
| Maximum thickness | 1 in |
| Power | 110 VAC single phase, 10 amp |
| Machine interface | Dry-contact low-voltage interlock |
| 655VFT dimensions | 65.5 in L x 23.5 in W, height adjustable 33 to 36 in |
| VFS200 length | 85.5 in |
Specifications above are taken from this product’s own All For Mailers page copy; no Walco Combo spec sheet is on file. Throughput, VFS200 width and height, and system weights are not published and have been omitted rather than estimated.
Still Supported by All For Mailers
Even though this model is no longer in current production, All For Mailers still stands behind it. As a veteran-owned dealer whose people have been in the mailing and print-finishing industry since 1991, we help keep your equipment running with genuine parts, supplies, and experienced service support.
Looking to upgrade? All For Mailers configures current Walco feeders and vacuum-transport bases into matched feed-and-transport systems — and can add an autoloader with the VF200AL — tailored to your inline application.
Need supplies or parts? Visit SuppliesForMailers.com.
Additional information
| Power | 110 VAC single phase, 10 amp |
|---|
Frequently Asked Questions
Are the Walco Combo Feed and Transport Systems still available new?
All For Mailers can build an equivalent system from current Walco VF200 feeders and transport bases (such as the 655VFT and VFS200 configurations) and supports installed systems with parts and service. Contact us for the right current setup.
What is the difference between the 655VFT and VFS200 combo systems?
The 655VFT pairs the VF200 vacuum feeder with the heavy-duty Walco 420 transport for demanding materials, while the VFS200 pairs the VF200 with a simpler five-foot vacuum transport for smaller operations — both handling material up to about 28 in x 19.5 in and 1 in thick.
How does a Combo system compare to buying the VF200 feeder on its own?
The VF200 on its own is a VF Series vacuum friction feeder with a 19.9 in width capacity that feeds pieces down to 3 in (2 in with the VF-CK card kit). A Combo system is that feeder pre-engineered onto a matched transport base, handling material from 3 in x 5 in up to about 28 in x 19.5 in and 1 in thick, on a 110 VAC 10 amp circuit with a dry-contact interlock to the rest of the line.
Can I still get parts and supplies?
Yes — visit SuppliesForMailers.com or call 866-430-2874.
Related products
- New
- New
- New
- New
Reviews
There are no reviews yet.