Walco 350INC Incline Bump Turn
The Walco 350INC Incline Bump Turn lets you run a low-output folder or tabber inline with the rest of your equipment — one adjustment raises the infeed to meet it, ramping product up to standard-height machines.
Description
About the Walco 350INC
Now you can run your folder or tabber inline with the rest of your equipment, thanks to the Walco 350INC Incline Bump Turn System. With one simple adjustment, the infeed end drops to meet the outfeed of your folder, tabber or any low-output machine. The output end stays stationary, creating an adjustable inclined ramp that carries product up to a standard-height tabber or addressing machine.
Made in the USA by Walco and built to last, the 350INC turns left or right, offers variable-speed transport, and has adjustable belts and guides for quick, easy setup. Its uncompromising drivetrain uses large-diameter steel shafts, steel drive pulleys, 12"-wide steel rollers and sealed shaft locking collar bearings. It handles material from 5"L x 3"W up to 8.5"W x 11"L, up to 1/2" thick standard; measures 35"L x 23.5"W with infeed 20–36"H and outfeed 33–36"H; and runs on a 110 VAC single-phase 10-amp circuit.
In a production mail line, an incline / bump-turn section links equipment that sits at different heights or on different runs of the floor, keeping product moving continuously as it climbs and changes direction. It is used to route flow around a corner or up to a downstream station without manual handling.
Specifications
| Type | Incline conveyor with bump-turn function |
|---|---|
| Turn direction | Left or right |
| Incline action | Infeed end drops with one adjustment to meet the outfeed of a folder, tabber or other low-output machine; outfeed end stays fixed |
| Material size | 5 in L x 3 in W up to 8.5 in W x 11 in L |
| Material thickness | Up to 1/2 in standard |
| Machine dimensions | 35 in L x 23.5 in W |
| Infeed height | 20–36 in, adjustable |
| Outfeed height | 33–36 in |
| Electrical | 110 VAC single-phase, 10-amp circuit |
| Transport | Variable speed |
| Drivetrain | Large-diameter steel shafts, steel drive pulleys, 12 in-wide steel rollers, sealed shaft locking collar bearings |
| Origin | Made in the USA by Walco |
| Belts and guides | Adjustable, built from non-proprietary components |
| Setup | Quick and easy setup |
| Manufacturer | Walco Systems, LLC — Avon Lake, Ohio |
| Current production | Yes — listed in Walco Systems’ current Specialty Machines / Incline Bump Turn range |
Sources: this product’s own page copy on AllForMailers.com, cold-verified value by value against the manufacturer’s published data on the Walco Systems 350INC product page (https://www.walcosystems.com/products/350inc-35855). Turn direction, material size, material thickness, physical dimensions and the 20–36 in infeed / 33–36 in outfeed heights match Walco exactly, as does the electrical service. Walco publishes no downloadable brochure for the Incline Bump Turn and states that all specifications are subject to change without notice. Figures Walco does not publish — rated throughput, belt width, motor rating and machine weight — are omitted rather than inferred.
Still Supported by All For Mailers
The 350INC is a current Walco Systems production model, and All For Mailers is an authorized Walco dealer. We quote new units, integrate them into an existing line, and support units already installed with genuine parts and service. Veteran-owned and expert since 1991.
Need supplies or parts? Visit SuppliesForMailers.com.
Additional information
| Max Media Size | 5 in L x 3 in W up to 8.5 in W x 11 in L |
|---|---|
| Media Thickness | Up to 1/2 in standard |
| Power | 110 VAC single-phase, 10-amp circuit |
Frequently Asked Questions
Is the Walco 350INC still available new?
Yes. The 350INC is a current Walco Systems production model and All For Mailers is an authorized Walco dealer, so new units are quoted through us. We also support installed 350INC systems with genuine parts and service.
What size material can the 350INC handle?
From 5"L x 3"W up to 8.5"W x 11"L, up to 1/2" thick in standard configuration, turning left or right.
How does the 350INC compare with the 240BT?
Both turn product left or right over the same 5 in L x 3 in W to 8.5 in W x 11 in L range up to 1/2 in thick. The 240BT is the flat bump turn at 24 in L x 23.5 in W. The 350INC is 35 in L x 23.5 in W and adds the incline, carrying pieces from a 20–36 in infeed up to a 33–36 in outfeed.
Can I still get parts and supplies?
Yes — visit SuppliesForMailers.com or call 866-430-2874.
Related products
- New
- New
- New
- New
Reviews
There are no reviews yet.