Accufast PMX Printing System
Description
About the Accufast PMX System
The PMX was not a single machine but a configurable Accufast printing system, sold through a virtual configurator that let a buyer build the line module by module. Accufast published the configurator itself rather than a specification sheet for the system as a whole, so what follows is an identification and configuration record, not a specification table.
Accufast PMX System at a Glance
| System type | Configurable inkjet printing system |
|---|---|
| Brand | Accufast |
| Imager options | Base only, or 1, 2, 3 or 4 imagers |
| Feeding options | HDF feeder, VL labeler, or VL plus HDF |
| Drying option | CS3D dryer |
| Output option | Catch tray |
| Console option | With or without computer tray |
| Manufacturer status | Accufast has closed |
| Parts position | See the parts note below |
| Supported alternative | RENA T-950 |
Source: the Accufast PMX system configurator published at notesystem.com. Accufast published no overall speed, dimension, weight or power figures for the assembled PMX system, so none are listed here. Component figures are on the individual module pages.
Downloads
Parts Support from All For Mailers
Accufast has closed. The Accufast PMX system is discontinued and is no longer supported new by the manufacturer.
Protect what you have. These machines were built to last, and the mechanics will outlive the electronics every time. If you’re running one, put it on a quality surge protector, and add static protection — especially in dry winter air or on high-speed paper handling. Power spikes and static are what kill boards, and on these machines a board may not be replaceable at any price. It’s the cheapest insurance there is for equipment you can’t simply reorder.
What’s actually available: aftermarket rollers and some bearings, across the Accufast line. Motors for the KT, KT2 and XL. That’s it — everything else is gone. If you’re running an Accufast today, call us at 866-430-2874 and we’ll tell you exactly what we can and can’t get for your machine.
Need a machine you can count on? the RENA T-950 — current and fully supported, all backed by our parts, service and lifetime phone support.
Need supplies or parts? Visit SuppliesForMailers.com.
Frequently Asked Questions
What was the Accufast PMX?
A configurable Accufast inkjet printing system rather than one machine. A buyer chose a base with up to four imagers, then added feeding, drying, output and console modules.
Which modules could go on a PMX?
Accufast listed a base or 1 to 4 imagers, the HDF feeder, the VL labeler or VL plus HDF, the CS3D dryer, a catch tray, and a computer tray option.
Can I still get parts for a PMX system?
Accufast has closed. What is actually available is aftermarket rollers and some bearings across the Accufast line, plus motors for the KT, KT2 and XL. Everything else is gone. Call us at 866-430-2874 and we will tell you exactly what we can and cannot get for your machine.
Related products
- New
- Discontinued — Not Supported
- Discontinued — Not Supported
- Discontinued — Not Supported
