Accufast HDF Feeder
The Accufast HDF was a heavy-duty friction feeder built to feed reliably and invisibly — glossy mailers, brochures, coupons, even catalogs — at up to 250 ft/min. Accufast has closed; new units are no longer made.
Description
About the Accufast HDF Feeder
The Accufast HDF is a friction feeder. Accufast published it with a 12″ stack and a speed range of 1 to 250 feet per minute, handling material from 3 1/2″ to 12″ wide and up to 12″ long at a maximum thickness of 3/8″. It appears in the Accufast PMX printing system as a selectable feeding module, on its own or in combination with the VL labeler.
Accufast HDF Specifications
| Machine type | Feeder |
|---|---|
| Brand | Accufast |
| Weight | 95 lbs |
| Speed | 1-250 ft/min |
| Stack capacity | 12″ |
| Maximum material thickness | 3/8″ |
| Material width | 3 1/2″ to 12″ |
| Material length | Up to 12″ |
Source: Accufast manufacturer specifications published at notesystem.com. Fields the manufacturer did not publish are left out rather than estimated.
Parts Support from All For Mailers
Accufast has closed. The Accufast HDF feeder is discontinued and is no longer supported new by the manufacturer.
Protect what you have. These machines were built to last, and the mechanics will outlive the electronics every time. If you’re running one, put it on a quality surge protector, and add static protection — especially in dry winter air or on high-speed paper handling. Power spikes and static are what kill boards, and on these machines a board may not be replaceable at any price. It’s the cheapest insurance there is for equipment you can’t simply reorder.
What’s actually available: aftermarket rollers and some bearings, across the Accufast line. Motors for the KT, KT2 and XL. That’s it — everything else is gone. If you’re running an Accufast today, call us at 866-430-2874 and we’ll tell you exactly what we can and can’t get for your machine.
Need a machine you can count on? the RENA T-950 — current and fully supported, all backed by our parts, service and lifetime phone support.
Need supplies or parts? Visit SuppliesForMailers.com.
Additional information
| Weight | 95 lbs |
|---|---|
| Speed (pieces/hr) | 1-250 ft/min |
| Feed Width | 3 1/2" to 12" |
Frequently Asked Questions
What is the Accufast HDF?
A friction feeder rated 1 to 250 feet per minute with a 12" stack. It handles material 3 1/2" to 12" wide, up to 12" long, up to 3/8" thick.
Can I still get parts for an Accufast HDF?
Accufast has closed. What is actually available is aftermarket rollers and some bearings across the Accufast line, plus motors for the KT, KT2 and XL. Everything else is gone. Call us at 866-430-2874 and we will tell you exactly what we can and cannot get for your machine.
What are the HDF dimensions?
Accufast published a weight of 95 lbs but did not publish overall dimensions for the HDF, so we do not list any. We would rather leave a field blank than estimate it.
Related products
- New
- New
- New
- New
