XPS ProMail Production Inkjet Monochrome Printer
The RENA XPS ProMail production monochrome inkjet printer addresses up to 26,000 #10 envelopes per hour, in 3-inch or 4-inch print-height configurations. Request a quote — call 866-430-2874.
Showing all 19 resultsSorted by price: low to high
- New
- New
Walco 350IJ Inkjet Imaging System
The Walco 350IJ Inkjet Imaging System is an inline addressing base that prints, dries and mails on material up to 20″ wide with a 350 vacuum transport base. All For Mailers supports it with parts, supplies, and service.
- New
Walco 655MB Multibase Addressing System
The Walco 655MB is a multibase addressing system built on a 65.5-inch print-and-transport platform, printing on material up to 20″ wide with room for multiple inkjet heads and inline devices. All For Mailers supports it with parts, supplies, and service.
- New
Walco 240CB 24 in Camera Base (No Vacuum)
$5,995.00VT Series 24-inch camera base (no vacuum) for mounting cameras and inspection devices over the mailstream.
- New
Walco 240VT 24 in Vacuum Transport Base
$8,375.00VT Series 24-inch vacuum transport base for printers, inspection devices, attachers, and folders.
- New
Walco 350VT 35 in Vacuum Transport Base
$9,685.00VT Series 35-inch vacuum transport base for holding pieces flat through an inline mail production line.
- New
Walco 420VT 42 in Vacuum Transport Base
$10,715.00The Walco 420VT is a 42 in VT Series vacuum transport base that carries mail pieces flat and in register through a production line.
- New
Walco 655VT 65.5 in Vacuum Transport Base
$12,125.00The Walco 655VT is a 65.5 in VT Series vacuum transport base that carries mail pieces flat and in register through a production line.
- New
Walco 4224SB 42 in Print / 24 in Dry Split Base
$14,825.00SB Series print-and-dry split base, 42-inch print / 24-inch dry, 400 FPM with standard dryer interlock.
- New
Walco 4235SB 42 in Print / 35 in Dry Split Base
$15,125.00SB Series print-and-dry split base, 42-inch print / 35-inch dry, running at 400 FPM.
- New
Walco 960VT 96 in Vacuum Transport Base
$15,610.00The Walco 960VT is a 96 in VT Series vacuum transport base that carries mail pieces flat and in register through a production line.
- New
Walco 4224SBH 42 in Print / 24 in Dry Split Base – High Speed
$15,700.00High-speed SB Series print-and-dry split base, 42-inch print / 24-inch dry, running at 600 FPM.
- New
Walco 655VT-28W 65.5 in x 28 in Transport Base
$15,735.00The Walco 655VT-28W is a 65.5 in VT Series vacuum transport base with a wide 28 in bed that carries mail pieces flat and in register through a production line.
- New
Walco 4235SBH 42 in Print / 35 in Dry Split Base – High Speed
$16,000.00High-speed SB Series print-and-dry split base, 42-inch print / 35-inch dry, running at 600 FPM.
- New
Walco 655VFT VF Feeder & 42 in Print Base
$16,410.00Walco production system pairing a VF vacuum friction feeder with a 42 in print base for an integrated feed-and-print station.
- New
Walco 4224SBX 42 in Print / 24 in Dry Split Base – Upgraded High Speed
$17,950.00Upgraded high-speed SB Series 42/24 split base, 600 FPM, up to 70,000 pcs/hr; requires 208/220VAC 1-phase.
- New
Walco 4235SBX 42 in Print / 35 in Dry Split Base – Upgraded High Speed
$18,250.00Upgraded high-speed SB Series 42/35 split base, 600 FPM, up to 70,000 pcs/hr, with larger blower, through-the-belt dryer vacuum and upgraded I/O controls; requires 208/220VAC 1-phase.
- New
Walco 960VT-28W 96 in x 28 in Vacuum Transport Base
$20,025.00The Walco 960VT-28W is a 96 in VT Series vacuum transport base with a wide 28 in bed that carries mail pieces flat and in register through a production line.
- Discontinued — Not Supported
Accufast CKx Imaging Kit
The Accufast CKx Imaging Kit is a modular inkjet system that mounts over a transport or mailing base, expandable from 1.5″ to 6″ of print with individually positioned imagers at up to 600 dpi.
How to choose production floor equipment
Start with base width, measured in inches. Walco transport and split bases in this category run from 24 in up to 96 in — the width has to match your print zone and the media you're running, so measure your actual job before comparing models.
Next, decide between a vacuum transport base and a print/dry split base. A vacuum transport base moves media through the line under vacuum hold-down for accurate, consistent positioning. A split base combines a print zone and a separate dry zone in one frame, which simplifies layout when you're building a line from scratch. Which one fits depends on the print and drying equipment you're integrating.
Most items here are floor-standing production components, not standalone printers — plan for the imaging head, dryer, and conveyor you'll pair with the base, and confirm compatibility before ordering.
If you need a complete, ready-to-run printer rather than a base to build around, the XPS ProMail and Accufast CKx in this category are imaging options worth asking about — tell us your volume and we'll confirm fit.
Brands we carry
Production floor equipment in this category comes from Walco, Accufast, and XPS.
Production floor equipment questions
What's the difference between a vacuum transport base and a split base?
A vacuum transport base uses vacuum hold-down to move media accurately through the print zone. A split base combines a print zone and a dry zone in one frame. Which one you need depends on the rest of your line — call us and we'll walk through it.
Do I need a base plus separate printing and drying equipment, or a complete printer?
Most items in this category are base platforms meant to be built into a custom line with your own or additional imaging and drying equipment. If you want a ready-to-run printer instead, ask us about the XPS ProMail or Accufast CKx options here.
How do I know what base width I need?
Measure your print zone and the widest media you'll run, then match it to a base in that range — Walco bases here run from 24 in to 96 in. Send us your numbers and we'll confirm.
What does "high speed" or "upgraded high speed" mean on a split base?
It refers to the base's rated transport speed tier. Higher tiers support faster production runs but should be matched to the imaging and drying equipment feeding into them — ask us before you mix and match.
What is a multibase addressing system?
It's a Walco platform, like the 655MB, built to combine multiple addressing functions on one base rather than requiring separate machines. Ask us whether it fits your specific line configuration.