Veteran-Owned · BBB A+ · Experts Since 1991
Accufast tabbers and labelers are simple, rugged, and fixable — our favorite kind of machine. Refurbs, parts, and support available.
Showing all 21 resultsSorted by price: low to high
The Accufast XLR is a tabletop roll-fed label applicator that applies up to 15,000 labels per hour face-up, with a sliding head for precise positioning on the fly. Discontinued and no longer supported new — supplies and parts still available through All For Mailers.
The Accufast ET is a versatile tabber (wafer sealer) for edge- and top-tabbing self-mailers and booklets, with format changes by a twist of a knob. Accufast no longer makes this machine; All For Mailers can recommend a current replacement.
The Accufast KT/ET/HDF inline system — the “Slim Jim System” — combined an Accufast KT or ET tabber with a high-density feeder for automatic inline tabbing. Accufast no longer makes this line; All For Mailers can recommend a current replacement.
The Accufast Freehand is a compact, hand-fed tabber (wafer sealer) that applies 1″ paper circle tabs at up to 12,500 pieces per hour. Accufast no longer makes this machine; All For Mailers can recommend a current replacement.
The Accufast P4 is a modular tabletop thermal-inkjet address printer for envelopes, cards and booklets, printing up to 50 inches per second on media up to 3/8″ thick. Accufast has closed the P4; All For Mailers can recommend a current replacement.
The Accufast PMx was an expandable commercial inkjet addressing system — add print heads to grow capacity without re-working the shop. Accufast has closed and the PMx is no longer made.
The Accufast P8 was a tabletop addressing system with an eight-cartridge, individually adjustable print bank and the strongest vacuum of any tabletop printer — built to print on thick flaps and irregular surfaces. Accufast has closed; the P8 is no longer available.
The Accufast CKx Imaging Kit is a modular inkjet system that mounts over a transport or mailing base, expandable from 1.5″ to 6″ of print with individually positioned imagers at up to 600 dpi.
The Accufast XL Labeler is a versatile tabletop label applicator, stamp affixer and tabber that applies to pieces 5″–16″ wide at up to 15,000 per hour — though Accufast has closed and parts are now scarce.
The Accufast KT is a single-head crash tabber and wafer sealer known for high productivity and tight, accurate tabs — but parts are scarce, so it is no longer sold.
The Freehand Label Applicator is a simple, made-in-USA tabletop labeler for non-production mailings, applying labels to up to 8,000 pieces per hour. Discontinued and no longer supported new — supplies and parts still available through All For Mailers.
The Accufast KT2 is a double-head crash tabber (wafer sealer) that applies one or two tabs per piece at up to 15,000 pieces per hour. Accufast no longer makes this machine; All For Mailers can recommend a current replacement.
The Accufast FX was a reliable friction feeder that fed brochures, self-mailers and double postcards into envelopes at up to 20,000 pieces per hour. Accufast has closed; new units are no longer made.
Discontinued — Not Supported. Accufast closed in 2019. We no longer buy or sell Accufast machines and cannot warranty them; remaining parts sell while supplies last. Need stamps applied? See the AFM80ST Stamp Applier & Tabber. Looking at an Accufast XL? Here is the honest picture from a shop that serviced Accufast equipment for decades….
The Accufast KT family also reached the market wearing other badges — the KT was sold as the Formax FD 260 and Rena T-300, and the FX as the Formax FD260-10. Same machines, different nameplates — and the same honest advice applies to all of them. Accufast KT / FX Family at a Glance Page…
The Accufast ET family — including the ET-R and ET LDM variants — was also sold as the Formax FD 280. Same machine, different badge, same honest advice. Accufast ET Family at a Glance Page type Family buying advisory Brand Accufast Models covered ET, including the ET-R and ET LDM variants Also sold as Formax…
About the Accufast VL The Accufast VL is a labeler built in two parts: a base that carries the material past the labeling head, with feeder control integrated into the base, and a head that holds the label supply. It runs fan-fold or roll labels, and Accufast published it as suited to 3M Post-it Notes….
The Accufast HDF was a heavy-duty friction feeder built to feed reliably and invisibly — glossy mailers, brochures, coupons, even catalogs — at up to 250 ft/min. Accufast has closed; new units are no longer made.
About the Accufast PM6 The Accufast PM6 is an inkjet addressing and imaging printer built on HP inkjet technology, running black and spot colour inks. Accufast published two print speeds for it: 9,000 pieces per hour at 600 dpi, or 16,000 pieces per hour at 150 or 300 dpi. It runs mail pieces from 3.5″…
About the Accufast CS3D The Accufast CS3D is a combined conveyor and dryer: a 38″ transport belt feeding a 22 1/2″ drying tunnel in a 46″ overall frame, with belt speed adjustable from 0 to 150 feet per minute and working height adjustable from 28″ to 37 1/2″. Accufast wrote the model two ways in…
About the Accufast PMX System The PMX was not a single machine but a configurable Accufast printing system, sold through a virtual configurator that let a buyer build the line module by module. Accufast published the configurator itself rather than a specification sheet for the system as a whole, so what follows is an identification…
