|
|
Your Source for Address Printing Solutions
FREE 5 Year Board Warranty on most New Addressing Products and some Refurbished!
Call for Details 1-866-471-6764
We have separated the address printers into 5 categories, with general information on each category, to make it easier to compare their features and specifications.
- LASER Addressing Systems: Print anywhere in 1 pass at laser quality! Disadvantage: Slow, low feed capicity, limited thickness. Advantage: Print Quality, User friendly, Print unmatched graphics, No barcode and merlin problems, print any barcode, Fast and Easy setup.
- Table Top / Fixed Head / Fixed Feeder / Address Printers: Print head fixed in place mail piece moves under head. Feeder built into system.Disadvantage: Print area limited to head height, must use built in feeder Advantage: Faster than Shuttling Head Systems, quick setup time
- Table Top / Fixed Head / Console Addressing Systems: Print head fixed in place mail piece moves under head. Feeder NOT built into system allowing different feeders to be attached.Disadvantage: Print area limited to head height, slightly longer setup time than fixed feeder systems Advantage: Can use different feeders adding flexibility, easily add inline equipment such as a tabber
- Table Top Shuttling Head Addressing Systems: Print head moves back and forth across mail piece, Disadvantage slower than fixed head, more moving parts than fixed head Advantage: normally can print anywhere on mailer, quick and easy setup
- Floor Model Mailing Systems: Large fixed head systems Disadvantage: Cost, Repairs tend to take longer adding cost, longest setup time Advantage: Durability, Can use different feeders, easily add inline tabber, normally good vacuum transport, the right one will last a lifetime, most upgradeable.
|
|
|
|
We have tried to list all active printer
models to allow for easy comparison.
|
|
|
|
|
|
|
|
|
|
|
|
Make - Model
|
Max Speed
|
Print Area
|
Max Thickness
|
Vacuum
1-8, 8 being best
|
|
Rena Imager 1.5 Plus
Best Seller
|
30,000/hr
|
1.5” High
|
1/8” - 1.0125”
3.175 mm
|
None
|
|
Secap 22K
|
22,000/hr
|
1.5” High
|
1/8” - 1.125”
3.175 mm
|
None
|
|
Rena Imager 1.5
|
11,000/hr
|
1.5” High
|
1/8” - 1.0125”
3.175 mm
|
None
|
|
Rena Imager 2.5
|
30,000/hr
|
2.5” High (2 Banks One 1.5” Bank, 2nd Bank 1”)
|
1/4” - 0.25”
6.35 mm
|
None
|
|
Secap 26K
|
26,000/hr
|
2.5” High (2 Banks One 1.5” Bank, 2nd Bank 1”)
|
1/4” - 0.25”
6.35 mm
|
None
|
|
Secap 30K (Considered Fixed Feeder because it works best with it’s own feeder)
|
30,000/hr
|
3” High (Two 1.5” Banks)
|
1/2” - 0.5”
12.7 mm
|
None
|
|
Rena Imager 2XP
|
26,000/hr
|
3” High (Two 1.5” Banks)
|
3/8” - 0.375”
9.525 mm
|
None
|
|
|
|
|
|
|
|
|
|
|
Make - Model
|
Speed
|
Print Area
|
Thickness
|
Vacuum
1-8, 8 being best
|
|
Accufast P4
|
20,000/hr
|
2” High
|
1/2” - 0.5”
12.7mm
|
5
|
|
Accufast P8
Best Seller
|
30,000/hr
|
4” High (Two 2” Banks)
|
3/4” - 0.75”
19.50 mm
|
8
|
|
Accufast pmX
|
34,000/hr
|
up to 6”
152.4 mm (Four 1.5” Banks)
|
1/2” - 0.5”
12.7 mm
|
8
|
|
Rena Envelope
Imager XT 3.0
|
34,000/hr
|
3” High (3 Banks, 1.5”, 1”, 0.5”)
|
3/8” - 0.375”
9.525 mm
|
6
|
|
Rena Envelope
Imager XT 4.0
|
34,000/hr
|
4” High (4 Banks, 1.5”, 1”, 1”, 0.5”)
|
3/8” - 0.375”
9.525 mm
|
6
|
|
Rena Imager III
|
24,000/hr
|
3” High (Two 1.5” Banks)
|
1/2” - 0.5”
12.7 mm
|
2
|
|
Secap 30KNFO
|
30,000/hr
|
3” High (Two 1.5” Banks)
|
1/2” - 0.5”
12.7 mm
|
None
|
|
Secap SA 5300 vt
(See Imager III)
|
30,000/hr
|
3” High (Two 1.5” Banks)
|
1/2” - 0.5”
12.7 mm
|
2
|
|
|
|
|
|
|
|
|
Make - Model
|
AKA
|
Speed
|
Max DPI
|
Thickness
|
|
Rena Imager CS
COLOR
|
|
4,000
|
2400 x 1200
|
|
|
Bryce 5KL
|
Pitney Bowes W650®
|
5,000
|
300
|
1/16” - 0.0625”
1.5875 mm
|
|
Secap 5KLE
|
Pitney Bowes DA300 AddressRight®
|
5,000
|
600 horizontal, 300 vertical
|
1/16” - 0.0625”
1.5875 mm
|
|
Secap 9KL
Bryce 9KL
|
Pitney Bowes DA500
|
9,000
|
600
|
1/8” - 1.0125”
3.175 mm
|
|
Pitney Bowes 550e AddressRight® Addressing System
|
Bryce - Secap 9KLC (Color Version of 9KL
|
9,000
|
600
|
1/8” - 1.0125”
3.175 mm
|
|
Secap 11K
|
Replaced by 13K
|
11,000
|
600
|
1/4” - 0.25”
6.35 mm
|
|
Secap 13K
|
Pitney Bowes DA700
|
13,000
|
600
|
1/4” - 0.25”
6.35 mm
|
|
Pitney Bowes 750e AddressRight® Addressing System
|
Bryce - Secap 13KC (Color version of 13K)
|
13,000
|
600
|
1/4” - 0.25”
6.35 mm
|
|
|
|
|
|
|
|
|
Make - Model
|
Speed
|
Print Area
|
Thickness
|
|
Rena XPS-ProMail System
|
33,000/hr
|
up to 6”
152.4 mm (Four 1.5” Banks) / 1.5” standard
|
up to 2” - 50.8 mm optional 0.5” - 50.8 mm standard
|
|
Secap Jet 1
|
30,000/hr
|
3" of print using (2) 1-1/2" print banks
· 4.5" of print using (1) 1-1/2" and (1) 3" print banks
· 6" of print using (2) 3" print banks
|
up to 0.625”
|
|
Walco 350 IJ *a must see and price!
|
30,000/hr
|
up to 6”
152.4 mm (Four 1.5” Banks) / 1.5” standard
|
up to 2” - 50.8 mm optional 0.5” - 50.8 mm standard
|
|
Accufast pmX (not realy a traditional Floor Model unit, but it thinks it is)
|
29,000/hr
|
up to 6”
152.4 mm (Four 1.5” Banks) / 1.5” standard
|
0.5 inches
|
|
|
|
|
|
* Vacuum rating not scientific, based on input from our technical staff
** Speed not based on real world tests, numbers supplied by makers web sites
|
|
|
|
|
|
|
|
|
|
|
COPYRIGHT 2005 All For Mailers, All Rights Reserved
Machines - Products Copyright of their respective manufacturers |
|
|
|
|
|
|
|
Page Index
|
Site Modified: August 28, 2008
|
|
|
Affiliate Login
|
|
|
|
